Grandstream Networks HT701 User Manual
Ht70 series analog telephone adaptor
Hide thumbs
Also See for HT701:
- User manual (67 pages) ,
- Configuration manual (8 pages) ,
- Quick start manual (4 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Grandstream Networks HT701
Summary of Contents for Grandstream Networks HT701
- Page 1 Grandstream Networks, Inc. HT70X Analog Telephone Adaptor HT701 HT702 HT704 HT701 HT702 HT704 HT70X User Manual www.grandstream.com Firmware Version 1.0.0.18 http://esupport.grandstream.com VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299...
-
Page 2: Table Of Contents
..............33 ANAGING IRMWARE AND ONFIGURATION OWNLOAD RESTORE FACTORY DEFAULT SETTING ....................35 Grandstream Networks, Inc. HT-70X User Manual Page 2 of 35 Firmware Version 1.0.0.18 Last Updated: 03/2012 VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299... - Page 3 SCREENSHOT OF OGIN PAGE SCREENSHOT OF EBOOT PAGE 7. S CREENSHOT OF EBOOTING PAGE Grandstream Networks, Inc. HT-70X User Manual Page 3 of 35 Firmware Version 1.0.0.18 Last Updated: 03/2012 VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299...
-
Page 4: Ht70X User Manual
Thank you for purchasing Grandstream‟s HT70X, the affordable, feature rich Analog Telephone Adaptor. Grandstream HandyTone70X is a new addition to the popular HandyTone ATA product family. It features the rich audio quality, a broad range of voice codecs, and functionality including one independent SIP account per FXS port. -
Page 5: Connect Your Ht70X
Internet Port Power (RJ-45 connector Supply 10/100 Mbps) Reset Display LEDs (12V;0.5A) (green) Grandstream Networks, Inc. HT-70X User Manual Page 5 of 35 Firmware Version 1.0.0.18 Last Updated: 03/2012 VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299... - Page 6 POWER LED Indicates Power. Remains ON when power is connected Internet LED Indicates Access to Internet. Remains ON while there is Access (HT701 and HT702 Only) Link/Activity LED Indicates if There is Activity on the Internet Port (HT701 and HT702 Only)
- Page 7 During Firmware Recovery Stage* Internet / 0.4sec ON/ 0.4sec OFF Phone *Note: In Provisioning and Firmware Recovery Stage, the power LED is Steady ON. Grandstream Networks, Inc. HT-70X User Manual Page 7 of 35 Firmware Version 1.0.0.18 Last Updated: 03/2012...
- Page 8 Figure 2: HT70X Connection Diagram Cordless Phone Analog Internet HT701/702/704 ADSL/Cable Phone Modem Ethernet Grandstream Networks, Inc. HT-70X User Manual Page 8 of 35 Firmware Version 1.0.0.18 Last Updated: 03/2012 VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299...
-
Page 9: Product Overview
Flexible DTMF transmission method, user interface of In-audio, RFC2833, and/or SIP Info IP Signaling SIP (RFC 3261) Provisioning TFTP, HTTP, HTTPS, TR-069, XML Grandstream Networks, Inc. HT-70X User Manual Page 9 of 35 Firmware Version 1.0.0.18 Last Updated: 03/2012 VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299... -
Page 10: Hardware Specification
Device Management Web interface or via secure encrypted AES or non-encrypted central configuration file for mass deployment using Grandstream binary file or xml format. Auto/manual provisioning system or via built-in IVR. NAT-friendly remote software upgrade (via TFTP/HTTP/HTTPS) for deployed devices including behind firewall/NAT. -
Page 11: Basic Operations
Press “9” to reboot the device Enter MAC address to restore factory default setting (See Restore Factory Default Setting section) “Invalid Entry” Automatically returns to main menu Grandstream Networks, Inc. HT-70X User Manual Page 11 of 35 Firmware Version 1.0.0.18 Last Updated: 03/2012... -
Page 12: Placing A Phone Call
3. Enter the IP address after the dial tone and voice prompt “Direct IP Calling” Using Star Code 1. Pick up the analog phone then dial “*47” 2. Enter the target IP address. Grandstream Networks, Inc. HT-70X User Manual Page 12 of 35 Firmware Version 1.0.0.18 Last Updated: 03/2012 VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299... -
Page 13: Call Hold
Note: continuous busy tone does not indicate the transfer has been successful, nor does it indicate the transfer has failed. It often means there was a failure to receive second NOTIFY – check firmware for most recent release. Grandstream Networks, Inc. HT-70X User Manual Page 13 of 35 Firmware Version 1.0.0.18... -
Page 14: 3-Way Conferencing
A can pick up the phone to resume conversation with B. 3-Way Conferencing The HT701/702/704 supports Bellcore style 3-way Conference. Instructions for 3-way conference: Assume that call party A and B are in conversation. Caller A(HT70X) wants to bring third Caller C into conference: 1. -
Page 15: Call Features
Toggles between active call and incoming call (call waiting tone). If not in conversation, flash/hook will switch to a new channel for a new call. Pressing pound sign will serve as Re-Dial key. Grandstream Networks, Inc. HT-70X User Manual Page 15 of 35 Firmware Version 1.0.0.18... -
Page 16: Configuration Guide
Once the HTTP request is entered and sent from a web browser, the user will see a log-in screen. There are two default passwords for the login page: Grandstream Networks, Inc. HT-70X User Manual Page 16 of 35 Firmware Version 1.0.0.18... -
Page 17: Important Settings
DTMF via SIP INFO Set priority of DTMF methods according to your preference. This setting should be based on your server DTMF setting. Grandstream Networks, Inc. HT-70X User Manual Page 17 of 35 Firmware Version 1.0.0.18 Last Updated: 03/2012... -
Page 18: Preferred Vocoder (Codec)
DHCP mode: all the field values for the Static IP mode are not used (even though they are still saved in the Flash memory.) The HT701 acquires its IP address from the first DHCP server it discovers from the LAN it is connected. Using the PPPoE feature: set the PPPoE account settings. - Page 19 PPPoE Link Up Indicates whether the PPPoE connection is up if the HT70X is connected to DSL modem. This filed indicates the type of NAT connection used by the HT70X. Grandstream Networks, Inc. HT-70X User Manual Page 19 of 35 Firmware Version 1.0.0.18...
-
Page 20: Advanced User Configuration
Advanced User configuration includes the end user configuration and the advanced configurations including: a) SIP configuration, b) Codec selection, c) NAT Traversal Setting and d) other miscellaneous configuration. HT701 and HT702 FXS SIP account(s) have its own configuration page. HT704 has two (2) profiles for the four (4) FXS ports. - Page 21 The password needed to authenticate with the HTTP/HTTPS server. Password Firmware File Prefix Default is blank. If configured, HT701 will request firmware file with the prefix. This setting is useful for ITSPs. End user should keep it blank. Firmware File Postfix Default is blank.
- Page 22 NTP serve Syslog Server The IP address or URL of System log server. This feature is especially useful for the ITSP (Internet Telephone Service Provider) Grandstream Networks, Inc. HT-70X User Manual Page 22 of 35 Firmware Version 1.0.0.18 Last Updated: 03/2012 VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299...
- Page 23 Syslog Level Select the HT701 to report the log level. Default is NONE. The level is one of DEBUG, INFO, WARNING or ERROR. Syslog messages are sent based on the following events: product model/version on boot up (INFO level) NAT related info (INFO level)
- Page 24 User account information, provided by VoIP service provider (ITSP). Usually in the form of digit similar to phone number or actually a phone number. HT701 and HT702 only SIP service subscriber‟s Authenticate ID used for authentication. Can be identical to or Authenticate ID different from SIP User ID.
- Page 25 SIP Registration Controls whether the HT701 needs to send REGISTER messages to the proxy server. The default setting is Yes. Default is No. If set to Yes, the SIP user‟s registration information will be cleared on Unregister on Reboot reboot.
- Page 26 Only the user part of a SIP address needs to be entered here. The HT70X will automatically append the “@” and the host portion of the corresponding SIP address. HT701 and HT702 only Proxy-Require SIP Extension to notify SIP server that the unit is behind the NAT/Firewall.
- Page 27 Note: In some cases user wishes to dial strings such as *123 to activate voice mail or other application provided by service provider. In this case * should be predefined inside dial plan feature and the Dial Plan should be: { *x+ }. Grandstream Networks, Inc. HT-70X User Manual Page 27 of 35 Firmware Version 1.0.0.18 Last Updated: 03/2012 VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299...
- Page 28 Softswitch vendors. Session Expiration Grandstream implemented SIP Session Timer. The session timer extension enables SIP sessions to be periodically “refreshed” via a SIP request (UPDATE, or re-INVITE. Once the session interval expires, if there is no refresh via a UPDATE or re-INVITE message, the session will be terminated.
- Page 29 This function lets you configure ring tone cadence preferences. User has 10 choices. The configuration, completed in Distinctive Ring Tones block in the same page, applies to ring tones cadences configured here. Grandstream Networks, Inc. HT-70X User Manual Page 29 of 35 Firmware Version 1.0.0.18...
-
Page 30: Saving The Configuration Changes
Map to FXP Port # This is used only when peering with a Grandstream GXW410x. Default is 1, Supported values are 1-8, meaning line 1 to line 8 of the GXW410x device where the port will be mapped to. -
Page 31: Configuration Through A Central Server
TFTP or HTTP (thus no NAT issues) and other communication protocols to communicate with each individual Grandstream device for firmware upgrade, remote reboot, etc. Grandstream provides GAPS service to VoIP service providers. Use GAPS for either simple redirection or with certain special provisioning settings. -
Page 32: Software Upgrade
LAN. It is recommended to conduct firmware upgrade in a controlled LAN environment if possible. For users who do not have a local firmware upgrade server, Grandstream provides a NAT-friendly TFTP server on the public Internet for firmware upgrade. -
Page 33: Instructions For Local Firmware Upgrade Using Tftp Server
1. Unzip the file and put all of them under the root directory of the TFTP server. 2. Put the PC running the TFTP server and the HT701 device in the same LAN segment. 3. Please go to File -> Configure -> Security to change the TFTP server's default setting from "Receive Only"... - Page 34 Yes, every minutes(60-5256000). Yes, daily at hour (0-23). Yes, weekly on day (0-6). Grandstream Networks, Inc. HT-70X User Manual Page 34 of 35 Firmware Version 1.0.0.18 Last Updated: 03/2012 VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299...
-
Page 35: Restore Factory Default Setting
Restoring the Factory Default Setting will DELETE all configuration information of the phone. Please BACKUP or PRINT out all the settings before you approach to following steps. Grandstream will not take any responsibility if you lose all the parameters of setting and cannot connect to your VoIP service provider.