User Maintenance Instructions - George Foreman GV12 Owner's Manual

User Maintenance Instructions

This appliance requires little maintenance. It contains no user service-
able parts. Do not try to repair it yourself. Contact a qualified appliance
repair technician if the product requires servicing.
CAUTION: To avoid accidental burns, allow the Contact Roaster to cool
thoroughly before cleaning.
1. Before cleaning, unplug the Contact Roaster from the wall outlet and
allow to cool for approximately 30 minutes.
2. Inside cleaning: Place the Drip Tray under the front of the Contact
Roaster. Wipe the plates with absorbent paper towel or a sponge.
Run off will drip into the Drip Tray. If necessary, use the contoured
plastic Cleaning Utensil to scrape off any excess fat or food particles
from the Heating Plate. The opposite end of the Cleaning Utensil can
be used to push any accumulated residue through the opening and
into the Drip Tray.
3. Stubborn build-up: Use a non-metallic scrubbing pad to clean the
plates.
4. Empty the Drip Tray. Wash the Baking Pan, Wire Rack, Drip Tray and
Cleaning Utensil in warm, soapy water. Rinse and dry thoroughly.
5. Outside cleaning: Wipe with a warm, damp sponge and dry with a
soft, dry cloth.
6. Do not use steel wool, scouring pads, or abrasive cleaners on any
part of the Contact Roaster.
7. DO NOT IMMERSE IN WATER OR OTHER LIQUID.
8. Make sure to hold the top cover (Lid) by hand while cleaning to pre-
vent accidental closing and injury.
9. Store the cord by wrapping around Cord Wrap Area only when
Contact Roaster is fully cooled.
9