Good Read Delay; User-Specified Good Read Delay - Honeywell 2020 User Manual

scan the bar code below and then scan a digit (1-9) bar code and the Save bar
code on the Programming Chart inside the back cover of this manual. Default =
1.
Number of Beeps/LED Flashes

Good Read Delay

This sets the minimum amount of time before the image scanner can read
another bar code. Default = 0 ms (No Delay).
* No Delay
Short Delay (500 ms)
Medium Delay (1,000 ms)
Long Delay (1,500 ms)

User-Specified Good Read Delay

If you want to set your own length for the good read delay, scan the bar code
below, then set the delay (from 0-30,000 milliseconds) by scanning digits from
the inside back cover, then scanning Save.
User-Specified Good Read Delay
4 - 3