Mapping of Printed Bar Codes
on page A-7), and scan the value and the Save
bar code from the
Programming Chart
on the inside the back cover of this man-
ual. The data characters should then appear properly.
Code 93 Code Page
Straight 2 of 5 Industrial (three-bar start/stop)
<Default All Straight 2 of 5 Industrial Settings>
Straight 2 of 5 Industrial
On
* Off
Straight 2 of 5 Industrial Message Length
Scan the bar codes below to change the message length. Refer to
Message
Length Description
(page 7-2) for additional information. Minimum and
Maximum lengths = 1-48. Minimum Default = 4, Maximum Default = 48.
Minimum Message Length
Maximum Message Length
7 - 12