Beeper And Led Sequences And Meaning; Image Scanner Led Sequences And Meaning; 2020 Led Sequences And Meaning - Honeywell 2020 User Manual

Beeper and LED Sequences and Meaning

The image scanner contains LEDs on the top of the unit to indicate its power up,
communication, and battery status. Simply stated, red LED = error; green
LED = success of any type. The unit's audible indicators have meaning as well:
3 beeps = error; 2 beeps = menu change; 1 beep = all other successes.
The table below lists the indication and cause of the LED illumination and beeps
for the image scanner.

Image Scanner LED Sequences and Meaning

LED Indication
Normal Operation
Red Flash
Green Flash
Red, blinking
Menu Operation
Green Flash
Red, blinking

2020 LED Sequences and Meaning

The base contains a red LED that indicates the status of the unit and verifies its
communication with the host system and a green LED that indicates image
scanner battery charge condition.
Charge Condition
Image Scanner inserted
into base
>80% charged
30% to 80% charged
<30% charged
Note: Charging only occurs with external power applied to the 2020 or 12 volt
host power.
3 - 4
Beeper Indication
None
1 beep
3 beeps
2 beeps
3 beeps
Charge Status Indicator (Green LED)
Three flashes
On continuously
Slow flash, 1 second on, 1 second off
Fast flash, 300 mSec on, 300 mSec off
Cause
Battery low
Successful communi-
cation or linking
Failed communication
Successful menu
change
Unsuccessful menu
change