Carrier Voip; Nortel Ip Phone 1120E User Guide (Cicm; Nn10300-022 02.01 Standard - Nortel 1120E User Manual

7
Assigning a directory entry to a feature key
Follow this procedure to assign a directory entry to a feature key. Assigning
a directory entry to a feature key gives you the ability to speed dial that
number when you press the key.
Prerequisites
The feature key you select must be defined as Local, see
key type" (page 56)
Step
1
2
3
4
5
Enabling or disabling autoscroll
If autoscroll is enabled, the IP Phone automatically directs you to the screen
for the active feature. For example, if your secondary Directory Number
(DN) is configured on screen two, and you get a call to that number, the
feature screens scroll to page two. You can answer the call immediately
without searching for the screen.
Follow this procedure to enable or disable the autoscroll feature.
Copyright © 2007, Nortel Networks
.
To assign a directory entry to a Local key, see
entry to a feature key" (page
Action
From the main menu, open the Feature menu.
A list of the feature keys and their current assignments appears.
Select the key defined as Local.
The Assign menu appears.
Press Feature.
The directory contact list opens.
Scroll through the list and select the entry to assign to the feature key.
Press Ok, or press the send key.
A check mark appears beside that entry in the directory. The number
is dialed when you press the key.

Carrier VoIP

Nortel IP Phone 1120E User Guide (CICM)

NN10300-022 02.01 Standard

(I)SN10 15 June 2007
Using the Assign menu 57
"Assigning a directory
57).
—End—
—End—
"Defining the