Connecting The Ip Phone To The Lan; Carrier Voip; Nortel Ip Phone 1120E User Guide (Cicm; Nn10300-022 02.01 Standard - Nortel 1120E User Manual

Hide thumbs Also See for 1120E:

Table of Contents

Connecting the IP Phone to the LAN

Follow this procedure to connect the terminal to the Local Area Network

(LAN), and to a power source. See

Prerequisites

IP Phones can be powered by an AC adapter or over a LAN. Contact your

installation technician to identify the correct power option.

Step

CAUTION

Risk of equipment damage

Do not plug the IP Phone 1120E into a regular telephone jack.

This causes severe damage to the terminal. Consult your system

administrator to ensure that you plug your telephone into a

10/100BaseT Ethernet jack.

Action

Connect one end of the CAT-5 line cable to the LAN Ethernet port,

identiﬁed with a LAN icon, located on the back of the terminal.

Connect the other end of the CAT-5 line cable to the IP network jack.

For a terminal sharing LAN access with a PC, connect a second

CAT-5 line cable to the PC Ethernet port located on the back of the

terminal, identiﬁed by the PC icon. Connect the other end of the

cable to the Ethernet port on the computer.

For a secure power connection, thread the cord around the strain

relief, retaining hook, and channel on the back of the terminal.

Secure the terminal footstand to the terminal base.

(I)SN10 15 June 2007

"IP Phone connectors" (page

—End—

26).

Table of Contents