Memory Channel Selection; D Using The [M-Ch]/[Bank] Selectors; D Using The Keypad - Icom IC-R9500 Instruction Manual

■ Memory channel selection

D D Using the [M-CH]/[BANK] selectors
D D Using the keypad
[MEMO] [BANK] [M-CH]
[MEMO] Keypad
q Push [MEMO] to select memory mode.
w Rotate [BANK] to select the desired memory bank.
e Rotate [M-ch] to select the desired memory channel.
r To return to VFO mode, push [VFO].
• Last operated VCO appears.
• Or push numeral key (0–9) and [VCO] to return to the
desired VCO.
✔ Bank limit function
While rotating the [M-CH] selector, memory channels
are selectable in the current bank only (Bank limit ON);
or selectable from all banks (Bank limit OFF).
➥ Push and hold [MEMO] for 1 sec. to turn the bank
limit function ON (default) or OFF.
• "BANK" indicator appears or disappears.
q Push [MEMO] to select memory mode.
w Push the desired memory channel number using the
keypad.
• Enter 0 to 999 to select the regular memory channels.
• Enter 1000 to 1099 to select the auto write memory
channels A00 to A99. (Push "10" before entering mem-
ory number instead of A.
• Enter 1100 to 1199 to select the skip memory channels
S00 to S99. (Push "11" before entering memory number
instead of S.
• Enter 1200 to 1219 to select the scan edge channels
P0A to P9B.
1200 (P0A) 1205 (P2B)
1201 (P0B) 1206 (P3A)
1202 (P1A) 1207 (P3B)
1203 (P1B) 1208 (P4A)
1204 (P2A) 1209 (P4B)
e Push [MEMO] to select the desired memory chan-
nel.
[EXAMPLE]
To select the memory channel 3;
- Push [3], then push [MEMO].
To select the memory channel 520;
- Push [5], [2], [0], then push [MEMO].
To select the auto write memory channel A24;
- Push [1], [0], [2], [4], then push [MEMO].
To select the skip channel S65;
- Push [1], [1], [6], [5], then push [MEMO].
To select the scan edge channel P3B;
- Push [1], [2], [0], [7], then push [MEMO].
7-3
MEMORY OPERATION
1210 (P5A) 1215 (P7B)
1211 (P5B) 1216 (P8A)
1212 (P6A) 1217 (P8B)
1213 (P6B) 1218 (P9A)
1214 (P7A) 1219 (P9B)
7