Icom IC-R9500 Instruction Manual page 181

Please wait for 20sec.
WARNING! NEVER turn power OFF.
RX-DSP UPDATING...
Please wait for 45sec.
WARNING! NEVER turn power OFF.
UPDATING THE FIRMWARE
!3 After firmware loading is completed, the receiver
starts the update automatically and the dialog at left
is displayed.
RWARNING!: NEVER turn the IC-R9500 power
OFF at this stage.
The receiver firmware will be damaged.
!4 When the dialog disappears, the precaution as at
left is displayed.
!5 Read the precaution carefully, and then push
[F-6•OK].
• Return to CF/USB-Memory set menu.
!6 Push [POWER] to turn the IC-R9500 power OFF,
then ON again.
!7 Depending on the status of the update process, ei-
ther of dialogs at left will appears in sequence.
RWARNING!: NEVER turn the IC-R9500 power
OFF at this stage.
The receiver firmware will be corrupted.
!8 After the dialog disappears, the firmware update is
completed and the normal operation screen ap-
pears.
15-5
15