Icom IC-R9500 Instruction Manual page 71

D D Scope set mode (continued)
Max Hold
Turn the peak level holding function ON or OFF.
Center Type Display
Select the center frequency of the spectrum scope
indication (center mode only).
Waveform Color (Current)
Set the waveform color for the currently received sig-
nals.
Waveform Color (Max Hold)
Set the waveform color for the receiving signals max-
imum level.
Marker Color (RX)
Set the marker color for the displayed frequency while
the fix mode.
Waveform Color (Max Hold)
Set the marker color for the peak frequency of the re-
ceiving signals.
ON
Filter Center
• Filter center
• Carrier Point Center
• Carrier Point Center (Abs. Freq.)
161
• The color is set in RGB format.
• Push [F-3•Ω ≈] to select R (Red), G (Green) and B
(Blue), and rotate the ratio from 0 to 255 range.
• The set color is indicated in the box beside the RGB
scale.
130
• The color is set in RGB format.
• Push [F-3•Ω ≈] to select R (Red), G (Green) and B
(Blue), and rotate the ratio from 0 to 255 range.
• The set color is indicated in the box beside the RGB
scale.
255
• The color is set in RGB format.
• Push [F-3•Ω ≈] to select R (Red), G (Green) and B
(Blue), and rotate the ratio from 0 to 255 range.
• The set color is indicated in the box beside the RGB
scale.
130
• The color is set in RGB format.
• Push [F-3•Ω ≈] to select R (Red), G (Green) and B
(Blue), and rotate the ratio from 0 to 255 range.
• The set color is indicated in the box beside the RGB
scale.
5-7
RECEIVE FUNCTIONS
: Shows the selected filter's center
frequency at the center.
: Shows the selected operating
mode carrier point frequency at
the center.
: In addition to the carrier point
center setting above, the actual
frequency is displayed at the bot-
tom of the scope.
185
66
150
66
5
221
176
50
176