D Fsk Decode Set Mode - Icom IC-R9500 Instruction Manual

4
RECEIVE MODES
D D FSK decode set mode
[F-1•Y] [F-2•Z] [F-3•Ω ≈]
[F-4•DEF]
• FSK decode set mode screen
FSK FFT Scope Averaging
Set the FFT scope waveform averaging function from
2 to 4 and OFF. (default: OFF)
FSK FFT Scope Waveform Color
Set the color for the FFT scope waveform.
• The color is set in RGB format.
• The set color is indicated in the box beside the RGB scale.
FSK Decode USOS
Turn letter code decoding after receiving a "space"
(USOS; UnShift On Space function) capability ON
and OFF.
FSK Decode New Line Code
Selects the new line code of the internal FSK de-
coder.
CR: Carriage Return, LF: Line Feed
[F-7•WIDE]
[EXIT/SET] Main dial
This set mode is used to set the decode USOS func-
tion, time stamp setting, etc.
• Setting contents
q During FSK mode operation, push [F-3•DECODE]
to select FSK decode screen.
w Push [F-1•MENU1] to select FSK decode menu
2, then push [F-6•SET] to select FSK decode set
mode.
• Push [F-7•WIDE] to toggle the screen size from normal
and wide.
e Push [F-1•Y] or [F-2•Z] to select the desired set
item.
r Set the desired condition using the main dial.
• Push and hold [F-4•DEF] for 1 sec. to select a default
condition or value.
• Push [F-3•Ω ≈] to select the set contents for some
items.
t Push [EXIT/SET] to exit from set mode.
OFF
Recommendation!
If you use the FFT scope waveform for tuning, use of
the default, or smaller number setting is recom-
mended.
• Push [F-3•Ω ≈] to select R (Red), G (Green) and B (Blue),
and then rotate the main dial to set the ratio from 0 to 255.
ON
• ON : Decode as letter code.
• OFF : Decode as character code.
CR,LF,CR+LF
• CR,LF,CR;LF : Makes new line with any codes.
• CR+LF : Makes new line with CR+LF code
only.
4-14
51 153 255