Denon AVR-4810 Owner's Manual page 58

ENGLISH
Making Detailed Settings (Manual Setup)
Setting items
Remote Preset Codes 5. The procedures for registering remote control codes and remote
(Continued) control preset registration are displayed.
b When there are several pages of preset codes, the pages can be
How to carry out preset register
n
See page 109 for details on how to carry out preset registration.
1. Press
remote control unit for the device you want to preset.
2. Press and hold in
3 seconds.
The signal transmission indicator flashes twice.
3. Enter a 5-digit code using
When the code is registered, the signal transmission indicator flashes
twice.
4. Check if the device is operating with the registered preset code.
If the device does not operate try registering a different preset code.
.
5 Press
to "MAIN" mode. Press
The main unit can also be operated with
Quick Select Name
1. Use
Change the "Quick Select"
change, then press
display title to one you
2. Use
prefer.
3. Use
• Up to 16 characters can be input.
• You can change the character type when you press
main remote control unit or
• The types of characters that can be input are as shown below.
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GLower case charactersH abcdefghijklmnopqrstuvwxyz
GSymbolsH ! # % & ' ( ) * + , - . / : ; < = " > ? @ [ \ ]
GNumbersH 0123456789 (Space)

Main remote control unit
operation buttons
Setting contents
REMOTE PRESET CODES
OPTION
Category
DVD
Brand
Hitachi
Code
30573 30664 30695
30713 30884 30748
1. Press [DEVICE] button on the remote for preset registration
2. Press and hold [RC SETUP] for at least 3 seconds
3 Using buttons [0-9], enter the 5-digit code
.
RETURN
Enter preset codes using remote controller
switched by pressing the main remote control unit's
the main remote control unit is in "MAIN" mode.
DEVICE DVD/HDP VCR/DVR TV SAT/CABLE
( , , or
RC SETUP
on the main remote control unit for at least
0 ~ 9
on the main remote control unit.
MAIN
on the main remote control unit to set the remote control
MENU
.
MENU
ui
to select the name of the Quick Select setting you want to
ENTER
p or .
o p to set the cursor to the character you want to change.
ENTER.
ui to change the character, then press
MENU
during character input.
:Displaying the menu
Cancel the menu
Setting items
Quick Select Name
(Continued)
Zone Rename
Change the display title of
each zone to one you prefer.
30141
Return
o p
or when
Trigger Out 1
Select the condition
) on the main
activating Trigger Out 1 for
the input source, surround
mode, etc.
See "TRIGGER OUT jacks"
(vpage 26)
information on trigger out.
Trigger Out 2
As with "Trigger Out 1",
select the condition
activating Trigger Out 2.
ENTER
, uio p , .
SEARCH
on the
:Moves the cursor
(Up/Down/Left/Right)
Setting contents
4. Repeat steps 1 ~ 3 to change the display name.
1. Use ui to select the zone name (MAIN ZONE, ZONE2, ZONE3 or
ZONE4) you want to change, then press
2. Use o p to set the cursor to the character you want to change.
ui
3. Use to change the character, then press
• Up to 10 characters can be input.
• You can change the character type when you press
MENU
main remote control unit or
• The types of characters that can be input are as shown below.
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GLower case charactersH abcdefghijklmnopqrstuvwxyz
GSymbolsH ! # % & ' ( ) * + , - . / : ; < = " > ? @ [ \ ]
GNumbersH 0123456789 (Space)
4. Repeat steps 1 ~ 3 to change the display name.
When Setting for Zone (MAIN ZONE / ZONE2 / ZONE3 / ZONE4)
n
for Trigger out is activated through linkage to the power of the zone set to
"ON".
n When Setting for Input Source
Activate trigger out when the input source set to "ON" is selected.
for more Valid for the zone set to "ON" with "When Setting for Zone".
n When Setting for Surround Mode
Activate trigger out when the surround mode set to "ON" is selected.
Valid when the "MAIN ZONE" set to "ON" with "When Setting
for
for Zone" is selected, and when the input source set to "ON" with
"When Setting for Input Source" is selected.
n When Setting for HDMI Monitor
Activate trigger out when the HDMI monitor set to "ON" is selected.
Valid when the "MAIN ZONE" set to "ON" with "When Setting
for Zone" is selected, and when the input source set to "ON" with
"When Setting for Input Source" is selected.
When setting for "Vertical Stretch"
n
Activate trigger out through linkage when "Vertical Stretch" (vpage
42) is set to "ON".
• ON : Activate trigger on this mode.
• – – – : Do not activate trigger on this mode.
:Confirm the setting
ENTER
p or .
ENTER
.
SEARCH
on the
during character input.
:Return to previous menu