Denon AVR-4810 Owner's Manual page 50

ENGLISH
Making Detailed Settings (Manual Setup)
Setting items
Network Connecting
t Use
(Continued)
Network connection starts.
When connection is established with the access point, "Connection
completed." is displayed.
AVR-4810 performs automatic network setup due to the DHCP
function.
When connecting to a network without a DHCP function, you will need
to manually configure the IP address.
For details, see page 48 "Wired LAN settings" in step 3.
How to connect with WPS (Push-button method)
n
Use access points (routers) equipped with WPS functions. See the
router user manual for details.
Set using the WPS function
q Select "WPS" and press
w Select "Push Button" and press

Main remote control unit
operation buttons
Setting contents
ENTER
i to select "Connection" and press
NETWORK CONNECTING
Connection completed.
ON
DHCP
IP Address 192.168.100.85
Exit
Detail
Enter
Terminate setup
NETWORK CONNECTING
Select a connection method appropriate for your
wireless LAN host
Search
WPS q
Manual
Enter Cancel
RETURN
NETWORK CONNECTING
Select whether to connect with the push-button or
PIN code method
Push Button
PIN Code
Enter
Connect to network with the push-button method
ENTER
.
ENTER
.
:Displaying the menu
Cancel the menu
Setting items
Network Connecting
.
(Continued)
w
Cancel
RETURN
:Moves the cursor
(Up/Down/Left/Right)
Setting contents
WPS
e Press for the target access point.
ENTER
r Select "Connection" and press .
When connection is established with access point, "Connection
completed" is displayed.
NETWORK CONNECTING
Select "Connection" after pressing the access point
WPS button
Connection
r
Enter
Start connection
This WPS (push-button) setup screen can be displayed directly
o p
by pressing and holding and on the main unit for at least 3
seconds.
n How to connect with WPS (PIN code method)
Use access points (routers) equipped with WPS functions. See the
router user manual for details.
NETWORK CONNECTING
Select a connection method appropriate for your
wireless LAN host
Search
WPS
q
Manual
Enter Cancel
RETURN
Set using the WPS function
NETWORK CONNECTING
Select whether to connect with the push-button or
PIN code method
Push Button
PIN Code
Connect to network with the PIN code method
ENTER
q Select "WPS" and press .
ENTER
w Select "PIN Code" and press .
:Confirm the setting :Return to previous menu
Cancel
RETURN
w
Enter Cancel
RETURN