To Store A Call History Entry In A Memory Location - VTech CD1291 User Manual

Caller ID operation

To store a call history entry in a memory location

Use the following steps to store the telephone number of a call history entry in
a one-touch or speed dial memory location.
When the telephone is idle, press CID/
1.
enter the call history.
2. Press / or
CID
entry.
3. If you need to change the way the telephone number
is dialed, press SELECT continually to scroll through
the various dialing formats:
area code + seven-digit number
1 + seven-digit number
seven-digit number
1 + area code + seven-digit number
Press MEM. The screen shows ENTER LOCATION.
4.
5. To save the displayed telephone number in a one-touch memory location,
press the desired one-touch key (M1, M2 or M3).
-OR-
To save the displayed telephone number in a speed dial memory location,
press a dial pad key (0 through 9) to choose the desired speed dial
memory location.
The screen shows STORED with a confirmation tone
6.
and then returns to the call history.
Press FLASH to return to idle mode.
7.
• If there is no number in the displayed call history entry, when you press
MEM in step 4, you will hear an error tone.
• If the memory location you selected in step 5 above is occupied, the new
telephone number replaces the old one. Take caution not to replace entries
you do not wish to delete from the memory locations.
/ to scroll to the desired caller ID
CID
or CID/
to
40
11:20 12-30
AM
16
8 0 0 - 6 2 4 - 5 6 8 8
ELIZABETH JONES
11:40 12-30
AM
_
ENTER LOCATION
11:40 12-30
AM
STORED
15
15
15