Getting started
3.
Rotate the mounting bracket 180 degrees.
Plug one end of the telephone line cord into the TEL LINE jack on the back
4.
of the telephone base. Bundle the telephone line cord and secure it with a
twist tie. Place the bundled telephone line cord inside the mounting bracket.
Route the telephone line cord through the slots of the mounting bracket.
5.
Insert the center tabs of the mounting bracket in slots
outer tabs of the mounting bracket in slots
Use slots
,
,
the tabletop-mount position.
Use slots
,
,
the wall-mount position.
8
and
for
Center tabs
and
for
and
and
.
. Snap the