VTech CD1291 User Manual page 49

Answering system operation
To play the outgoing announcement
Use the following steps to listen to the outgoing announcement.
1. Press /ANNC. The screen shows RECORD
SKIP
and the message window displays A.
2. Press
REPEAT/MEMO
PLAY.
Press SELECT. The current announcement plays.
3.
The message window displays AP.
4. When the playback is finished, the telephone beeps
once and then automatically returns to idle mode.
-OR-
Press
PLAY
To delete your outgoing announcement
Use the following steps to delete the outgoing announcement you recorded.
Follow steps 1-3 in To play the outgoing
1.
announcement on this page to play back the current
announcement.
DELETE during playback to delete your
2. Press
announcement. The telephone announces "Deleted"
with a beep and displays dE on the message window
for two seconds.
3. The system plays the pre-recorded announcement, "Hello, please leave a
message after the tone." After a beep, the telephone automatically returns
to idle mode.
When your outgoing announcement is deleted, calls are answered with the
pre-recorded announcement, "Hello, please leave a message after the tone."
or
SKIP/ANNC
/STOP to end the playback and return to idle mode.
to scroll to
45
11:20 12-30
AM
PLAY
11:20 12-30
AM
USE STOP TO END
11:20 12-30
AM
USE STOP TO END
11:20 12-30
AM
USE STOP TO END
A
AP
AP
dE