Remote Access - AT&T EP5632 User Manual

Answering system operations
NOTES:
•
If you pause for more
than five seconds
during remote access,
"Press five for help"
will be announced
three times. If no
commands are entered,
the call will
automatically.
•
If memory is full, the
system will answer
after 10 rings, and
announce "Press five
for help" three times.
Enter your remote
access code to enter
the remote access
mode.

Remote access

You can access your answering system remotely
by dialing your home telephone number from any
touch-tone telephone.
To remotely access your answering system:
1. Dial your telephone number from any touch
tone telephone.
2. At anytime when the answering system answers
the call, enter 5000 (default remote access
end
code, see page 53 to change this setting).
• If you have new messages, the system will
3. Enter the following remote commands on a
touch tone phone.
Remote Command and Action
.....Plays all messages
.....Plays only new messages
.....Deletes the current message
.....Deletes all old messages
.....Repeats the current message
.....Press twice to hear the previous message.
.....Pause/resume message (during playback).
.....Hear a list of remote commands
.....Skips to the next message (during playback)
.....Records a new announcement
.....Turns the answering system on or off
.....To stop message or announcement playback
.....Save all undeleted messages
hang up
4. Hang up to end the call and save all
undeleted messages.
If desired, cut out the remote access wallet
card at the back of this user's manual for
quick reference.
automatically announce the number of new
messages and then begin to play them.
(during playback)
(during playback).
92