Belt Clip & Optional Headset - AT&T EP5632 User Manual

Getting started Getting started
Belt clip & optional headset
Install belt clip as shown below, if desired.
For handsfree headset conversations, use any industry standard 2.5 mm
headset (purchased separately). For best results, use an AT&T 2.5 mm headset.
To purchase a headset, visit our website at
1 (800) 222-3111
call
Plug a 2.5 mm
headset into the
jack on the side of
the handset.
To attach the
belt clip:
Snap the belt clip
into the retaining
tabs on both sides
of the handset as
shown in the figure.
. In Canada, dial
www.telephones.att.com
1 (866) 288-4268
Lift the rubber
flap here.
Side of the
handset
15
To remove the belt
clip:
Gently lift either of the
belt clip retaining tabs,
shown in the figure,
outwards to remove
the belt clip from the
handset.
.
or