Remote Access - AT&T EP5632 User Manual

Answering system operations
NOTES:
1. If you pause for more
than four seconds
during remote access,
a help menu listing all
features and commands
will be announced. If no
commands are entered
for approximately 20
seconds, the call will
end automatically.
2. If memory is full, the
system will answer
after 10 rings, and
announce "Memory is
full, enter your remote
access code." Enter
your remote access
code to enter the
remote access mode.

Remote access

You can access your answering system remotely
by dialing your home telephone number from any
touch-tone telephone.
To remotely access your answering system:
1. Dial your telephone number from any touch
tone telephone.
2. At anytime when the answering system answers
the call, enter 5000 (default remote access
code, see page 53 to change this setting).
• If you have new messages, the system will
automatically announce the number of new
messages and then begin to play them.
3. Enter the following remote commands on a
touch tone phone.
Remote Command and Action
.....Plays all messages
.....Plays only new messages
.....Deletes the current message
(during playback)
.....Deletes all old messages
.....Repeats the current message
(during playback).
.....Press twice to hear the previous message.
.....Pause/resume message (during playback).
.....Hear a list of remote commands
.....Skips to the next message (during playback)
.....Records a new announcement
.....Turns the answering system on or off
.....To stop message playback
.....Save all undeleted messages
hang up
4. Hang up to end the call and save all
undeleted messages.
If desired, cut out the remote access wallet
card at the back of this user's manual for
quick reference.
90