Remote Access Commands - AT&T 2455 User Manual

2455_book_1ATT 8/29/00
ANSWERING SYSTEM OPERATION

Remote Access Commands

Function:
Play messages in
a mailbox
Repeat a message
Skip a message
Stop
Save messages
Delete message
Review announcement
Record announcement
Record memo
End remote access call
Turn system off
Turn system on
NOTE: The remote access call will automatically end if 20 seconds go by
with no key being pressed (other than when recording or playing
messages or announcements).
12:05 AM Page 27
AT TOUCH TONE PHONE
Command:
Press #, then the appropriate mailbox
number (1, 2, or 3). The system plays
new messages. If there are no new
messages, the system plays old messages.
Press # 4 while message is playing;
each press backs up another message.
Press # 6 while message is playing;
each press advances another message.
Press # 5.
Hang up.
Press # 9 while message is playing.
Press # 7; system plays announcement,
then beeps.
Press * 7; after beep, record
announcement, press # 5 to stop.
System plays back announcement.
Press * 8; then mailbox number where
you want memo recorded; speak after
beep; press # 5 to exit.
Press * 0.
Press # 0; the system announces,
"The machine is off. " Press # 0 again
to turn the system back on.
When system is off, it answers after 10
rings and announces, "Please enter your
security code. " Press #, then enter your
remote access code.
27