Abit PD5NE User Manual page 75

Quick Installation
Installing HDD LED connector:
PN1 - There is a specific orientation for pin 7 and pin 8. Connect the two-threads
IDE LED connector to the connector on mainboard.
Pin number
Installing Suspend and Power ON/OFF switch connector:
Watch the pin position and the orientation
PN1 - There is a specific orientation for pin 13 and pin 14. Connect the two-
threads suspend switch connector of the computer case to correct pins of
connector on the mainboard. You can ignore this connector since most of
computer cases do not support this feature (the mainboard itself supports it).
Pin number
13
14
PN1 - There is a specific orientation for pin 10 and pin 11. Connect the two-
threads Power on/off switch connector of the computer case to correct pins of
connector on the mainboard. You can ignore this connector since most of
computer cases do not support this feature (the mainboard itself supports it).
Pin number
10
11
Name of the signal or signification
HDD LED signal ¡i LED Cathode ¡j
7
HDD LED signal ¡i LED Anode ¡j
8
Name of the signal or signification
+5VDC
Ground
Name of the signal or signification
Power on/off
Ground
Watch the pin position and the
orientation
A-3