Abit PD5NE User Manual page 59

VGA Driver Setup
1.2.4 AutoShade R2.0 Setup
(1) The following procedures assume that
(a) You have complete "unpack & copy" procedure.
(b) Your ADI 4.2 drivers are located in C:\ADI42.
(2) Add the following settings to your batch file for AutoShade R2.0 (say
SHADE2.BAT) or to your "AUTOEXEC.BAT" file.
(a) For display driver setting,
SET DSPADI=\ADI42\RCPSIS.EXP
(b) For rendering driver setting,
SET RDPADI=\ADI42\RCPSIS.EXP
(3) Delete the configure file SHADE.CFG.
(4) Type
SHADE2
to re-configure the AutoShade.
(5) While prompting "Select display device:", choose "P386 AutoDesk Device
Interface display driver.".
(6) While prompting "Select rendering display driver:", choose "P386 AutoDesk
Device Interface rendering driver.".
(7) Go through all the instructions, the system would start with the desired
display setting.
<Enter>
4-5