Abit PD5NE User Manual page 63

VGA Driver Setup
3. Windows NT 4.0
3.1 Installation
(1) Click "Start" menu and select Control Panel from Settings group.
(2) Select Display icon.
(3) Select Settings of Display Properties.
(4) Select Display Type.
(5) Select Change from the Adapter Type area.
(6) Select Have Disk of Change Display.
(7) Place the Windows NT 4.0 Installation Disk (Diskette #1) into Floppy Drive
(8) When the "Install from Disk" dialog box appears, type the directory storing
the drivers and click "OK".
The directory in Diskette #1 is at "A:\WINNT40".
The directory in CD-Title is at "D:\MM\WINNT\WINNT40".
(9) When the "Change Display" dialog box appears, click "OK".
(10) When the "Third-party Drivers" dialog box appears, click "Yes".
A message will appear stating that the drivers were successfully installed. Click
"OK". You must now restart Windows NT 4.0.
3.2 Selecting resolution and color depth
(1) Click "Start" menu and select Control Panel from Settings group.
(2) Select Display icon.
(3) Select Settings.
(4) Select Color Palette to change between 16 colors, 256 colors, 32768 colors,
65536 colors, and 16777216 colors.
(5) To select desktop resolution size, go to the Desktop area and use the slide
bar to change resolution from 640x480, 800x600, 1024x768, and
1280x1024.
(6) Select Test to test the resolution. If the display test screen was good then
select "Yes" when the
"Testing Mode" dialog box appears. If the display test screen was bad then
select "No".
(7) Click "OK".
Windows NT 4.0 will change the mode without restarting Windows NT 4.0.
Windows NT 4.0 will give you an error message.
If the display test screen was good and you select "Yes",
4-9