Abit PD5NE User Manual page 12

2-4
PN1 - Power ON/OFF switch
There is no specific orientation. Since most cases do not support this feature,
most of you ignore this instruction.
Pin number
10
11
PN1 - SMI Switch
There is no specific orientation.
connector pins on the mainboard.
feature, most of you ignore this instruction.
necessary as it is already a part of the mainboard.
Pin number
13
14
PN1 - HDD LED connector
This connector has a specific orientation.
connector cable attached to the case to the IDE LED connector on the
mainboard.
Pin number
7
8
PN2 - Speaker connector
There is no specific orientation.
the PN2 connector pins on the mainboard.
Pin number
4
5
6
7
Name or significance of the signal
Power on/off
Ground
Name or significance of the signal
+5VDC
Ground
Name or significance of signal
LED' s Cathode
LED' s Anode
Name or significance of signal
+5VDC
Ground
Ground
Sound Signal
Connect the two-thread cable to the PN1
Since most cases do not support this
Furthermore, this feature is not
Connect the two-thread IDE LED
Connect the four-thread speaker cable to
Chapter 2