Abit PD5NE User Manual page 61

VGA Driver Setup
move cursor to "RCPADI" or "RDPADI".
Press
to select.
4 - Complete the other selections and exit configuration.
(9) After exit configure,
3DS will boot automatically
using the environment you just select.
(10) If your previous configuration is OK, 3DS will ask you to make detail
configuration for SiS 5597/5598 drivers.
If this didn't happen, please check your previous procedures or contact the
technical support people.
(11) In the detail configuration for PD5N drivers,
just follow the instructions appear on the screen and make your own choice.
If you are confused in anything, contact the technical support people for
solution.
(12) After detail configuration,
you will enter the 3DS main display screen and
you may begin your 3D Studio work
in the environment you make before.
(13) Once completing the detail configuration,
you may enter 3D Studio in the same configuration simply by type
\3DS3\3DS
next time.
(14) If you want to change your video configuration,
just follow the procedures mentioned before to re-configure
<Enter>
<Enter>
4-7