Abit PD5NE User Manual page 13

Installing the Mainboard
PN2 - Hardware Reset connectors
There is no specific orientation.
cable to the PN2 connector pins on the mainboard.
Pin number
1
2
FAN1 - CPU Fan power connector
This has a specific orientation. Connect the three-threads CPU fan cable to the
FAN1 connector.
Pin number
1
2
3
IR - Infrared remote Connectors (JP10)
Watch the pin number and the orientation.
This has a specific orientation. Your mainboard supports this feature, but you
must buy the infrared remote device as an option.
Pin number
1
2
3
4
5
ATXPWR - ATX Power input Connectors
These have a specific orientation. The three warning marks indicate that if you
make a mistake in pin number or connection orientation, you could destroy your
equipment. During installation, you just need to connect to the correct pins and
Name or significance of signal
Hardware reset signal
Ground
Name of the signal or signification
Ground
+12V
Ground
Name of the signal or signification
+5VDC
No connection
Receive data
Ground
Transmit data
Connect the two-thread hardware reset
2-5