Key Operator Mode - Panasonic DP-C265 Operating Instructions Manual

Key Operator Mode

No.
0 - 14 00 Print Printer Settings
01 Job Completion Time
02 Page Protection
03 Error Page Print
04 Spool Function
05 Text Print
07 Font List Print (PCL)
08 Font List Print (PS)
09 Mailbox Data Holding
10 Delete Mailbox Data
88
Parameter
Print the Printer Settings list.
To cancel printing the parameter
setting list, press "Stop" and
"OK".
While processing the
cancellation, panel operation is
denied, and an error beep is
produced.
The feeding paper(s) will be
ejected before completing the
above cancellation operation.
If setting a parameter, an
asterisk mark (*) will be added
before the parameter number.
Set the time-out period if the
machine does not receive a print
signal from the computer for a
specified time.
Select "Input", and then enter
the job completion time.
Set value to "On" to use page
protection.
Set value to "On" to print the
data of an error job.
Set value to "On" to set the
spool function.
Set value to "On" to print a text
with no pictures.
Print the PCL font list.
Print the PS font list.
When the optional Printer
Controller Module (for Adobe
PostScript 3) is installed.
Set the limit of storing the data in
the mailbox. When "Infinity" is
set, data is not deleted.
Select the mailbox data to be
deleted.
• All
All data is deleted from the
mailbox.
• Before
Deletes the data which is
received before the specified
date.
Comments
Stop, Start
1 to 999 (Sec)
Off, On
Off, On
Off, On
Off, On
Stop, Start
Stop, Start
Infinity, 1 day, 2 days,
3 days, 4 days, 5
days, 6 days, 7 days
All, Before
Selective Item Standard
Setting
Start
180 (Sec)
Off
On
On
On
Stop
Stop
7 days
Before