What You Need Before You Begin; Logging In To The Wireless Modem Router - NETGEAR Wireless-N 150 User Manual

Wireless-N 150 ADSL2+ Modem Router DGN1000 User Manual
For installation instructions in a language other than English, see the language options on the
Resource CD.

What You Need before You Begin

You need to prepare the following before you can set up your wireless modem router:
• Active Internet service provided by an ADSL account
• The Internet Service Provider (ISP) configuration information for your ADSL account
– ISP login name and password
– ISP Domain Name Server (DNS) addresses
– Fixed or static IP address
– Host and domain names
• Depending on how your ISP set up your Internet account, you need to know one or more of
these settings:
– Virtual path identifier (VPI) and Virtual channel identifier (VCI) parameters
– Multiplexing method
– Host and domain names
• ASDL microfilters as explained in the Wireless Modem Router DGN1000 Setup Manual
In addition, your computer must be set up to use DHCP to get its TCP/IP configuration from the
modem router. This is usually the case. For help with DHCP, see the documentation that came with
your computer, or see the link to the online document that you can access from
"Related Documents.
Your ISP should have provided you with all the information needed to connect to the Internet. If
you cannot locate this information, you can ask your ISP to provide it.

Logging In to the Wireless Modem Router

You can log in to the wireless modem router to view or change its settings.
Note: Your computer must be configured for DHCP. For help with configuring DHCP, see
the documentation that came with your computer or see the link to the online docu-
ment that you can access from
Appendix
1-2
"Preparing a Computer for Network Access" in
B.
Connecting Your Wireless Modem Router to the Internet
v1.1, January 2010
Appendix B,