NETGEAR Wireless-N 150 User Manual page 47

Wireless-N 150 ADSL2+ Modem Router DGN1000 User Manual
• Action. Choose how you want this type of traffic to be handled. You can block or allow
always, or you can block or allow according to the schedule you have defined in the Schedule
screen.
• Send to LAN Server. Enter the IP address of the computer or server on your LAN that will
receive the inbound traffic covered by this rule.
• WAN Users. These settings determine which packets are covered by the rule, based on their
source (WAN) IP address. Select the option that you want:
– Any: All IP addresses are covered by this rule.
– Address range: If this option is selected, you must fill in the Start and Finish fields.
– Single address: Enter the required address in the Start field.
• Log. You can select whether the traffic will be logged. The choices are:
– Never. No log entries will be made for this service.
– Always. Any traffic for this service type will be logged.
– Match. Traffic of this type that matches the settings and action will be logged.
– Not match. Traffic of this type that does not match the settings and action will be logged.
Inbound Rule Example: Allowing Video Conferencing
If you want to allow incoming video conferencing to be initiated from a restricted range of outside
IP addresses, such as from a branch office, you can create an inbound rule. In the example shown
in the following figure, CU-SeeMe connections are allowed only from a specified range of
external IP addresses. In this case, we have also specified logging of any incoming CU-SeeMe
requests that do not match the allowed settings.
Figure 3-5
3-7
v1.1, January 2010
Protecting Your Network