NETGEAR Wireless-N 150 User Manual page 18

To view or configure the basic settings:
1. Log in to the wireless modem router as described in
Router" on page 1-2.
2. Select Basic Settings to display the Basic Settings screen.
The Basic Settings screen is explained in
page 1-8.
3. Select Yes or No depending on whether your ISP requires a login. This selection changes the
fields available on the Basic Settings screen.
• Yes. If your ISP requires a login, select the encapsulation method. Enter the login name. If
you want to change the login time-out, enter a new value in minutes.
• No. If your ISP does not require a login, enter the account name, if required, and the
domain name, if required.
4. Enter the settings for the IP address and DNS server.
The default ADSL settings usually work fine. If you have problems with your connection,
check the ADSL settings. See
5. If no login is required, you can specify the MAC Address setting.
6. Click Apply to save your settings.
7. Click Test to test your Internet connection. If the NETGEAR website does not appear within
one minute, refer to
Note: When your Internet connection is working you will no longer need to launch the
ISP's login program on your computer to access the Internet. When you start an
Internet application, your wireless modem router automatically logs you in.
Connecting Your Wireless Modem Router to the Internet
Wireless-N 150 ADSL2+ Modem Router DGN1000 User Manual
"Understanding the Basic Settings Screen" on
"Configuring ADSL Settings" on page 1-10
Chapter 6, "Troubleshooting."
v1.1, January 2010
"Logging In to the Wireless Modem
for more details.
1-7