OPERATION
AC Receptacle Selection
The control panel, shown below, has a voltage selector switch and
four receptacles. Receptacle 4, the 240-volt receptacle, has two
powered terminals, 4A and 4B.
RECEPTACLE
1
VOLTAGE
SELECTOR
SWITCH
Power Producing Circuits
This generator is equipped with two power generating circuits. When
the voltage selector switch is in the 120 V/240 V position, each of the
two power producing circuits supplies power to specific receptacles.
When the voltage selector switch is in the 120 V ONLY position, the
power producing circuits operate in parallel, sharing the total load
connected to terminal 4A and receptacles 1, 2, and 3.
POWER
CIRCUIT 1
POWER
CIRCUIT 2
36
RECEPTACLE
2
120 V/240 V
RECEPTACLE
120 V ONLY
POWER CIRCUIT 2
POWER CIRCUIT 1
RECEPTACLE
4
TERMINAL 4A
TERMINAL 4B
3