Optional accessories
Optional feeding accessories
Feeding accessory
Trays 3 and 4 (Second Feeder Module))
Optional finishing accessories
Finishing accessory
High Capacity Stacker (HCS)
1-8
Description
The two-tray Second Feeder
Module (SFM), also referred
to as Trays 3 and 4, provides
an extra 4,000 sheet
capacity of either 8.5 x 11 in.
or A4 paper. Each drawer
holds 2,000 sheets (16 lb.
Bond to 80 lb. Cover/52 gsm
to 216 gsm).
Description
The HCS is an optional
finishing device that
provides stacking and
offsetting capabilities for
output to a Stacker Tray. The
HCS80 connects to the right
side of the digital press
replaces the Offset Catch
Tray (OCT).
DocuColor 7002/8002
Where to find
information
Information on Trays 2
and 4) can be found in this
user guide. Refer to the
following chapters for
more information:
•
Loading Paper
•
How to Clear Jams
•
Optional Accessories
•
Specifications
•
Appendix
Where to find
information
Information on the High
Capacity Stacker (HCS) be
found in this user guide.
Refer to the following
chapters for more
information:
•
How to Clear Jams
•
Optional Accessories
•
Basic
Troubleshooting
•
Specifications
•
Appendix
User Guide