DocuColor 7002/8002
6. When the Decurler Setup screen appears, enter the paper tray number you are using,
coated or non-coated and the paper weight.
7. The default curl setting (Paper Type) for the selected paper will be displayed (A-D). Type A is
selected in the example screen.
8. Select a different setting (A-D) and run the job again. Some experimentation may be
needed to find the correct setting.
Note
If you are not able to find an acceptable setting that minimizes curl, refer to the document
entitled DocuColor 7002/8002 Decurler Adjustment.
User Guide
How to adjust Paper Curl
5-3