2-2
Contact with the touch screen should be made by blunt items only, preferably the stylus included
with the 375 Field Communicator. The use of sharp instruments, such as screwdrivers, can
cause failure of the touch screen interface.
Initiating a Re-Flash initiates reinstallation of the system software from the System Card. This
should only be performed under the direction of technical support personnel.
INSTALLING
THE SYSTEM
CARD AND
THE BATTERY
PACK
Figure 2-1. Back side of the 375 Field Communicator
Battery pack charge
indicator button
WARNING
WARNING
1. Place the 375 Field Communicator face down on
a level, secure surface; see Figure 2-1.
2. Lock the stand into the hanger position. To pivot
past the stand position, squeeze the stand
together near the hinge.
Stand Assembly
Battery pack
retaining screws
Battery pack
Learning the Basics
System Card