Rename A Saved Configuration Offline; Compare Two Saved Configurations Offline - Emerson 375 User Manual

3-10

Rename a saved configuration Offline

Rename allows you to change the name of a
saved configuration. To rename a saved HART
configuration:
1. From the Saved Configuration menu, double-tap
Rename.
2. Double-tap the file you want to rename.
3. Enter the new file name and tap ENTER.
4. Tap SAVE.

Compare two saved configurations Offline

Any two configurations can be compared.
However, in order to compare two configurations of
the same field device, the following conditions
must be met:
• Device type (including manufacturer), device
revision, and DD revision must match exactly. A
dialog box will appear if the configuration is
different, however, you will not be told the
differences.
• Configurations can only be compared against
other configurations containing the same set of
variables. The 375 Field Communicator notifies
you if this condition is not met.
The format of data storage must match exactly.
The 375 Field Communicator notifies you if this
condition is not met.
1. From the Saved Configuration menu, double-tap
Compare.
2. Choose the storage location—Internal Flash or
Configuration Expansion Module and tap
ENTER.
3. Double-tap Name to select the configuration file.
4. Double-tap the desired file to compare.
5. Tap COMP to compare the configurations.
6. Tap OK when you are finished reading the
window.
HART Functionality