Fieldbus Functionality; Overview; Safety Messages - Emerson 375 User Manual

U ' M
SER S ANUAL
00375-0047-0001, Rev. C
February 2004
S 4
ECTION

OVERVIEW

SAFETY
MESSAGES
There could be a Database Mismatch. Changes made with the 375 may not be recorded in the
Host System database. Ensure all safety precautions and work procedures have been followed.
If this segment is connected to a Host System, the changes made with the 375 may not be
recorded in the Host System's permanent data base. Verify the changes in the database.
Otherwise, this could cause unpredictable results and, depending upon your application,
process disruption leading to property damage, serious injury, or death.
Process control could be affected. Changing device parameters could adversely affect the
control of your process.
Ensure all safety precautions and work procedures have been followed. Put control loop in
Manual/Out of service before applying changes. Verify output before returning control loop to
Auto. Failure to do so could result in property damage, death or serious injury.
www.fieldcommunicator.com
F F
IELDBUS
This section provides instruction on basic fieldbus
functionality for the 375 Field Communicator.
Procedures and instructions in this section may
require special precautions to ensure the safety of
the personnel performing the operation.
Information that raises potential safety issues is
indicated by a warning symbol (
following safety messages before performing an
operation preceded by this symbol.
WARNING
WARNING
375 F
IELD
UNCTIONALITY
C
OMMUNICATOR
). Refer to the