Running Methods; Displaying Device Status; Other Block List Selections; Detail Menu - Emerson 375 User Manual

Fieldbus Functionality
Other Block
List selections
Running methods (e.g. calibrations, sensor
trim, diagnostic etc.)
Select submenu choices as appropriate. Different
devices have different methods associated with
them. The selections on these menus vary
accordingly.
1. Display the live list; see page 4-11.
2. Double tap a device from the live list.
3. Double tap the desired block (typically methods
are run in the Transducer block).
4. Double tap Methods.
5. Double tap the type of method you want to run,
e.g. calibration, diagnostic. Follow the navigation
screens to run the method.

Displaying Device status

To display device status:
1. Display the live list; see page 4-11.
2. Double tap a device from the live list.
3. Double tap the desired block.
4. Double tap Status. Status parameter(s) will be
displayed.

Detail Menu

To view the Detail menu:
1. Display the live list; see page 4-11.
2. Double tap the device you want to work with.
3. Scroll down the block list and double tap Detail.
Double tap one of the following options:
• Physical Device Tag designates a field device's
role in the system. It is not recommended to
change the device tag when the device is
connected to a control system. Changing the
Physical Device Tag on a device which is on an
active segment could have unpredictable results.
4-15