Edit A Saved Configuration Offline - Emerson 375 User Manual

3-8
list configurations that have a tag or name that
begins P- 0 and ends with a 7, set the filter to
P - 0.7.
The XPAND button allows you to view the tag,
manufacturer, device type, descriptor, and the
configuration type. Tap CMPRS to return to the
previous compressed screen.
Choose from the following menu options:

Edit a saved configuration Offline

Edit a saved configuration while working offline:
1. From the Saved Configuration menu, double-tap
Edit.
2. If a warning appears, thoroughly read the
warning, tap CONT. to accept the warning and
proceed, or tap EXIT to end creating a new unit
configuration.
3. Mark the configurable variables you want saved
in the HART configuration. Double-tap
Mark all > OK to have all variables marked.
Double-tap Unmark all > OK to clear the marks
from all variables. To mark and edit variables
individually:
a.Double-tap Edit individually to configure
specific variables before sending them to a
device.
b.Scroll through the list of variables and select
the variable you want to mark or edit.
c.To change the value for the selected variable,
tap EDIT, change the value, and tap ENTER.
d.To mark the selected variable, tap MARK. A
"+" symbol indicates a mark to send. A "*"
symbol indicates a parameter has been edited.
e.Repeat steps b through d for other variables as
necessary.
4. Tap SAVE to return to the Contents menu.
HART Functionality