Table of Contents
Advertisement
Configuration
(DMX)
DMX
Personalities
and Starting
Address
DMX Channel Assignments and Values
Channel
3-CH
Radius™ 2.0 User Manual Rev. 2
Set the product in DMX mode to control with a DMX controller.
1.
Connect the product to a suitable power outlet.
2.
Turn the product on.
3.
Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
The Radius™ 2.0 has a single 3-channel personality.
The Radius™ 2.0 uses up to 3 DMX channels in its highest DMX mode, which defines the
highest configurable address to 510.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
If you are not familiar with the DMX protocol, download the DMX Primer from
www.chauvetlighting.com.
To select the starting address, do the following:
1.
Press <MENU> repeatedly until 512 shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select the starting address.
4.
Press <ENTER>.
Function
1
Auto Programs
2
Rotation
3
Strobe
Value
Setting
000 ó 255 No function
000 ó 255 Red rotation
000 ó 255 Green rotation
000 ó 255 Blue rotation
000 ó 255 White rotation
000 ó 255 Amber rotation
000 ó 255 All color rotation
000 ó 255 Color cycle rotation
000 ó 255 Sound-Active
000 ó 255 No function
000 ó 255 0~100%
000 ó 255 No function
000 ó 255 0-30 Hz
Motor speed controlled
by Ch. 2
Page 11 of 16
Advertisement
Table of Contents
