Configuration (Dmx); Dmx Personalities And Starting Address - Chauvet Slim PANEL TRI 24 IP User Manual

Configuration
(DMX)
DMX
Personalities
and Starting
Address
Page 10 of 18
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
The SlimPANEL TRI 24 IP has 4 DMX personalities, from a 3-channel mode for basic
control to a 9-channel mode with more advanced control over the lights.
The SlimPANEL TRI 24 IP uses up to 9 DMX channels in its 9-channel DMX mode, which
defines the highest configurable address to 504.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
If you are not familiar with the DMX protocol, download the DMX Primer at
www.chauvetlighting.com.
To select the DMX personality, do the following:
1. Press <MENU> repeatedly until PERS shows on the display.
2. Use <UP> or <DOWN> to select 3CH, 4CH, 5CH or 9CH.
3. Press <ENTER> to choose your DMX personality when it appears on the display.
To then choose your starting address:
1. Press <MENU> repeatedly until Addr shows on the display.
2. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
SlimPANEL TRI 24 IP User Manual (Rev. 6)