Integra DTR-5.8 Instruction Manual page 63

Using the Listening Modes—Continued
DTS-HD High Resolution Audio and DTS-HD Master Audio Sources
Source format
Media
Listening mode
Direct
Stereo
Multichannel
Dolby D
Dolby Digital Plus
DTS, DTS 96/24
DTS Discrete/Matrix
DTS-HD High Resolution
Audio
DTS-HD Master Audio
TrueHD
Dolby PLII Movie/
*2
Dolby PLIIx Movie
Dolby PLII Music/
*2
Dolby PLIIx Music
Dolby PLII Game/
*2
Dolby PLIIx Game
Dolby Digital EX/Dolby EX
Neo:6
Neo:6 Cinema
Neo:6 Music
Neural Surround (North
American model only)
Mono
*4
Mono Movie
*4
Orchestra
*4
Unplugged
*4
Studio-Mix
*4
TV Logic
All Ch Stereo
Full Mono
T-D
*1. During input of a 96 kHz DTS-HD Master Audio signal, the only sound balance or sound quality adjustment that can be made is Tone control. When
input is a 192 kHz DTS-HD Master Audio signal, it should be played at 96 kHz.
*2. If there are no surround back speakers, or Powered Zone 2 is being used, Dolby Pro Logic II is used.
*3. Depending on the input source (when the input is a 96 kHz signal, for example), it may be processed after DTS playback.
*4. Available only when using surround speakers.
: Requires 6.1/7.1 speakers. Not available while Powered Zone 2 is being used.
: Requires 7.1 speakers. Not available while Powered Zone 2 is being used.
Tip: To check the format of the digital input signal, see "Displaying Source Information" on page 55.
DTS-HD High Resolution Audio
Multichannel
2ch
*/2 except *2
Blu-ray, HD DVD
✔ ✔ ✔
✔ ✔ ✔
✔ ✔
✔ ✔
*3 *3
✔ ✔
*3 *3
✔
*3
✔
*3
✔
*3
✔
*3
✔
*3
✔ ✔ ✔
*3 *3 *3
✔ ✔ ✔
*3 *3 *3
DTS-HD Master Audio
Multi-
1/0 2ch
channel
Blu-ray, HD DVD
✔ ✔ ✔
✔ ✔ ✔
✔
✔
*3
✔
*3
*1
1/0
✔
✔
63