Listening Modes Available For Each Source Format - Integra DTR-5.8 Instruction Manual

Using the Listening Modes—Continued

Listening Modes Available for Each Source Format

Analog and PCM Sources
Source format
Media
Listening mode
Direct
Stereo
Multichannel
Dolby D
Dolby Digital Plus
DTS, DTS 96/24
DTS Discrete/Matrix
DTS-HD High Resolution
Audio
DTS-HD Master Audio
TrueHD
Dolby PLII Movie/
*2
Dolby PLIIx Movie
Dolby PLII Music/
*2
Dolby PLIIx Music
Dolby PLII Game/
*2
Dolby PLIIx Game
Dolby Digital EX/Dolby EX
Neo:6
Neo:6 Cinema
Neo:6 Music
Neural Surround (North
American model only)
Mono
*4
Mono Movie
*4
Orchestra
*4
Unplugged
*4
Studio-Mix
*4
TV Logic
All Ch Stereo
Full Mono
T-D
*1. For PCM 176.4/192 kHz signals input through HDMI IN, only, Direct and Stereo listening modes can be selected. (HDMI input only)
*2. If there are no surround back speakers, or Powered Zone 2 is being used, Dolby Pro Logic II is used.
*3. PCM 32-48 kHz signals only.
*4. Available only when using surround speakers.
*5. For T-D, Mono Movie, Orchestra, Unplugged, Studio-Mix, and TV Logic, PCM of 64 kHz, 88.2 kHz, and 96 kHz are processed at 32 kHz, 44.1 kHz,
and 48 kHz respectively.
: Requires 6.1/7.1 speakers. Not available while Powered Zone 2 is being used.
: Requires 7.1 speakers. Not available while Powered Zone 2 is being used.
Tip: To check the format of the digital input signal, see "Displaying Source Information" on page 55.
60
PCM
*1
32-96 kHz
176.4/192 kHz
CD, TV, radio
✔ ✔
✔ ✔
✔
✔
✔
✔
✔
✔
*3
✔
✔
✔
✔
Multichannel PCM
(32-192 kHz)
Multichannel, 1/0, 1+1
DVD
✔
✔