Integra DTR-5.8 Instruction Manual page 114

Presetting XM Channels
You can store a combination of up to 40 of your favorite
XM channels and AM/FM radio stations as presets.
1
Tune into the XM channel that
you want to store as a preset.
2 Press the [Memory] button.
The preset number flashes.
3
While the preset number is flash-
ing (about 8 seconds), use the
Preset [
a preset from 1 through 40.
4 Press the [Memory] button again
to store the channel.
The channel is stored and the preset
number stops flashing.
Repeat this procedure for all of your
favorite XM channels.
■ Selecting Presets
1 To select a preset, use the Preset
[ ]/[ ] buttons, or the remote
controller's CH [+/–] button.
■ Deleting Presets
1 Select the preset that you want to
delete.
See the previous section.
2
While holding down the [Mem-
ory] button, press the
[Tuning Mode] button.
The preset is deleted and its number
disappears from the display.
]/[ ] buttons to select
Displaying XM Radio Information
1
Press the [Display] button
repeatedly to cycle through the
AV receiver
available information.
Remote
controller
The following information can be displayed:
Channel name
Channel number
& preset number
Category
Artist
Song title
Listening mode
Note:
• If the category, artist, or song title is not available,
"- - -" will be displayed instead.
5