Setting The Zone 2 Out - Integra DTR-5.8 Instruction Manual

Zone 2—Continued
2
Use the Up and Down [
buttons to select "7. Hardware
Setup," and then press [Enter].
The Hardware Setup menu appears.
7. Hardware Setup
1. Remote Control
2. Zone2
3. Tuner
4. Analog Multich
5. HDMI
3
Use the Up and Down [ ]/[ ]
buttons to select "2. Zone2," and
then press [Enter].
The Zone2 menu appears.
7–2. Zone2
Powered Zone2
Zone2 Out
4
Use the Up and Down [
buttons to select "Powered
Zone2," and use the Left and
Right [
Not Act: ZONE 2 SPEAKERS termi-
nals deactivated.
Act: ZONE 2 SPEAKERS termi-
nals activated.
When Zone 2 is activated and turned on
(see below), the speakers connected to
the ZONE 2 SPEAKERS terminals
output sound, but the speakers con-
nected to the SURR BACK SPEAK-
ERS terminals do not (when Zone 2 is
activated but not used, the surround
back speakers work as normal).
5 Press the [Setup] button.
The setup menu closes.
Note:
This procedure can also be performed on the AV receiver
by using its [Setup] button, arrow buttons, and [Enter]
button.
]/[ ]
Not Act
Fixed
]/[ ]
]/[ ] buttons to select:

Setting the Zone 2 Out

If you've connected your Zone 2 speakers to a power
amp with no volume control in Zone 2, as explained in
"Using Another Amp in Zone 2" on page 84, you must
set the Zone 2 Out setting to Variable.
When set to Variable, the ZONE 2 OUT L/R jacks work
like pre outs.
1 Press the [Receiver] button fol-
lowed by the [Setup] button.
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "7. Hardware
Setup," and then press [Enter].
The Hardware Setup menu appears.
7. Hardware Setup
1. Remote Control
2. Zone2
3. Tuner
4. Analog Multich
5. HDMI
3
Use the Up and Down [ ]/[ ]
buttons to select "2. Zone2," and
then press [Enter].
The Zone2 menu appears.
7–2. Zone2
Powered Zone2
Zone2 Out
4
Use the Up and Down [
buttons to select "Zone2 Out,"
and use the Left and Right [
[ ] buttons to select:
Fixed: The ZONE 2 PRE OUT L/R
jacks work as line outs, and
the volume for Zone 2 is set
on the receiver or integrated
amp in Zone 2.
Variable:The ZONE 2 PRE OUT L/R
jacks work as pre outs, and the
volume for Zone 2 is set on
this AV receiver.
]/[ ]
Not Act
Fixed
]/[ ]
]/
85