Rear Panel - Integra DTR-5.8 Instruction Manual

Front & Rear Panels—Continued

Rear Panel

North American model
(North American model only)
1 2
bq br
The page numbers in parentheses show where you can find the main explanation for each item.
DIGITAL OPTICAL IN 1, 2 and OUT
These optical digital audio inputs are for connecting
components with optical digital audio outputs, such
as CD players and DVD players.
The optical digital audio output is for connecting a
digital recorder with an optical digital input, such as
a CD recorder.
DIGITAL COAXIAL IN 1, 2
These coaxial digital audio inputs are for connect-
ing components with coaxial digital audio outputs,
such as CD players and DVD players.
XM antenna (North American model only)
This jack is for connecting an XM Minituner and
Home Dock, sold separately (see the separate XM
instructions).
SIRIUS antenna (North American model
only)
This jack is for connecting a SIRIUS Satellite Radio
antenna (see the separate SIRIUS instructions).
HDMI IN 1, 2, and OUT
HDMI (High Definition Multimedia Interface) con-
nections carry digital audio and digital video.
The HDMI inputs are for connecting components
with HDMI outputs, such as DVD players.
The HDMI output is for connecting a TV or projec-
tor with an HDMI input.
AM ANTENNA (22)
These push terminals are for connecting an AM
antenna.
10
34
7 8
5 6
bs ck cm cn
bt cl
9 bk blbm bn
co cp
FM ANTENNA (22)
This jack is for connecting an FM antenna.
MONITOR OUT
The S-Video or composite video jack should be
connected to a video input on your TV or projector.
IR IN A/B and OUT
A commercially available IR receiver can be con-
nected to the IR IN A or B jack, allowing you to
control the AV receiver while you're in Zone 2, or
control it when it's out of sight, for example,
installed in a cabinet.
A commercially available IR emitter can be con-
nected to the IR OUT jack to pass IR (infrared)
remote control signals along to other components.
12V TRIGGER OUT (A/B/C)
These outputs can be connected to the 12-volt trig-
ger inputs on other components.
RS232
This port is for connecting the AV receiver to home
automation equipment and external controllers.
FRONT, CENTER, SURR & SURR BACK
SPEAKERS (20)
These terminal posts are for connecting your front,
center, surround, and surround back speakers.
ZONE 2 PRE OUT (84)
This analog audio output can be connected to a line
input on an integrated amplifier in Zone 2.
ZONE 2 SPEAKERS (84)
These terminals are for connecting speakers in
Zone 2.
bo bp