Connecting the AV receiver—Continued
Connecting the Speaker Cables
1
Strip 1/2" to 5/8" (12 to
15 mm) of insulation
from the ends of the
speaker cables, and
twist the bare wires
tightly, as shown.
2
Unscrew the terminal.
The following illustration shows which speaker should be connected to each pair of terminals. If you're using only one
surround back speaker, connect it to the SURR BACK/ZONE 2 L terminals.
Front high
Front wide
right
right
speaker
speaker
Surround
right
speaker
3
1/2" to 5/8"
(12 to 15 mm)
4
Front right
Front left
speaker
speaker
Surround
back right
speaker
Fully insert the bare
wires.
Screw the terminal tight.
Front wide
Front high
left
left
speaker
speaker
Surround
back left
speaker
Center
speaker
Surround
left
speaker
19