Controlling A Cd Player, Cd Recorder, Or Md Recorder - Integra DTR-40.1 Instruction Manual

Controlling Other Components—Continued

Controlling a CD Player, CD Recorder, or MD Recorder

By pressing the Remote Mode button that's been pro-
grammed with the remote control code for your CD
player, CD recorder, or MD recorder, you can control
your player with the following buttons.
The [CD] button is preprogrammed with the remote con-
trol code for controlling an Integra/Onkyo CD player.
For details on entering a remote control code for a differ-
ent component, see page 131.
Press the appropriate Remote
Mode button first.
On, Standby buttons
Set the component to On or Standby.
Arrow [ ]/[ ]/[ ]/[ ] and Enter buttons
Used to navigate menus and select items.
Setup button
Used to access the Integra/Onkyo CD player's set-
tings.
[ ], [ ], [ ], [
buttons
Play, Pause, Stop, Fast reverse, Fast forward, Previ-
ous, and Next.
Repeat button
Used with the repeat playback function.
Search button
Used to locate specific points.
Number buttons
Used to enter track numbers and times for locating
specific points. The [+10] button works as a +10
button or "--/---" button.
Display button
Displays information about the current disc or track,
including elapsed time, remaining time, total time,
and so on.
Muting button (58)
Mutes or unmutes the AV receiver.
Disc +/– button
Selects discs on a CD changer.
VOL [ ]/[ ] button (56)
Adjusts the volume of the AV receiver.
Random button
Used with the random playback function.
Play Mode button
Selects play modes on components with selectable
play modes.
CLR button
Cancels functions and clears entered numbers.
Note:
With some components, certain buttons may not work as
expected, and some may not work at all.
], [ ], [ ], [ ]
137