Presetting Am/Fm Stations - Integra DTR-40.1 Instruction Manual

Listening to the Radio—Continued

Presetting AM/FM Stations

You can store a combination of up to 40 of your favorite
AM/FM radio stations as presets.
1 Tune into the AM/FM station that
you want to store as a preset.
2 Press the [Memory] button.
The preset number flashes.
3 While the preset number is flash-
ing (about 8 seconds), use the
Preset [ ]/[ ] buttons to select a
preset from 1 through 40.
4
Press the [Memory] button again
to store the station or channel.
The station or channel is stored and the
preset number stops flashing.
Repeat this procedure for all of your
favorite AM/FM radio stations.
Note:
You can name your radio presets for easy identification
(see page 100). Its name is displayed instead of the band
and frequency.
Selecting Presets
62
Memory Preset /
Preset /
AV receiver To select a preset, use the Preset
[ ]/[ ] buttons, or the remote
controller's CH [+/–] button.
or
Remote
controller
or
Remote You can also use the remote con-
controller
troller's number buttons to select
a preset directly.
Deleting Presets
Memory, Tuning Mode
1
Select the preset that you want to
delete.
See the previous section.
2
While holding down the [Mem-
ory] button, press the [Tuning
Mode] button.
The preset is deleted and its number
disappears from the display.