Making a call
1. Enter the required number.
2. Press
, the number is dialled. Press
Receiving a call
1. Wait for the handset to ring.
2. Press
to answer. Press
Please note!
To switch between handset/handsfree press
only one person at a time to talk.
This product does not usually ring on the first signal to allow correct matching to the phonebook.
If the telephone cannot connect to a line, a warning tone will be heard. The problem may be due to the batteries
running low, the handset being too far from the base unit or all of the transmission channels being engaged.
Recall (R) button
To avoid having to remember commands, certain network services have been pre-
programmed to the menu buttons, see Other network services.
Volume control
The volume may be adjusted during a call using
Turning off/on
Press and hold the
Confirm disconnection by pressing Yes.
Redial function
Press
and scroll among the 30 most recently dialled numbers using
8
Mute button
The microphone can be turned off/on during a call using
KeyGuard
The KeyGuard is turned off/on by pressing and holding
Paging
Pressing
on the base unit will activate the paging signal of the handset. The signal will
J
stop automatically after a while or if the L button on the handset or the
base unit is pressed.
to terminate call.
L
button for a few seconds to turn the handset off or on.
L
English
to terminate call.
L
. Please remember that in speaker mode, it is only possible for
/
. Press OK.
}
{
/
{
}
.
8
#.
button on the
J
. Press
.