Expanded System - Doro 670R Manual

English

Expanded system

When you purchased the telephone, the handset was registered with the supplied base
unit. The handset may have the call number 1, which will be seen in the display on
standby. This number will be used also for internal calls between handsets.
If you wish to use several handsets with one base unit, you should ensure that the base
unit is placed "in the middle", to evenly divide the base unit range among the handsets.
You can register up to 5 handsets to one base unit.
This model is GAP (Generic Access Profile) compatible, which means that the handset and the
base unit can both be used with most other GAP compatible units irrespective of manufacturer.
However the GAP protocol cannot guarantee that all functions may be accessed.
Internal
When using several handsets with the same base unit internal calls (intercom) can be made
between those handsets.
1. Press Int.
2. Scroll to selected handset. Press OK.
Should an external call come in while an internal call is in progress, a tone will be heard.
You must then terminate the internal call by pressing , in order to be able to receive
L
the external call by pressing .
Transferring calls/Conference
1. While an external call is connected on line.
2. Initiate an intercom call as described above.
3. Press to transfer the call or press Conf for conference.
L